Driftwood Stain & Finishing Oil - Fusion Mineral Paint
Stain & Finishing Oil is a wood conditioner, stain, and top coat all in one that offers exceptional durability in high-traffic areas like table tops, kitchen cabinets, and even flooring.
It can be used on bare wood or over previously painted surfaces. No additional top coat is required – it is highly durable as is. If you’re looking for added durability, applying a coat of Natural will increase sheen and durability without intensifying your colour.
TOP TIPS:
- Different wood will produce different effects
- Make sure your surface is wax and oil free and sanded evenly
- Apply generously then wipe off any excess after 10 minutes
- The more you apply, the deeper the colour
- Using natural SFO on top will increase the sheen
- Allow 9 hours between coats
- Fully cured in 10 days
If you apply it over Fusion Mineral Paint™ for a glaze effect or to increase the sheen, we recommend removing excess immediately, as the SFO will not soak in and may leave a sticky finish that takes a few days to dry.
Use the Natural colour over Fusion Mineral Paint™ colours to increase the sheen and offer superior durability, or brush on one of the pigmented colours and wipe off immediately for a beautiful, easy glaze effect.
Please keep in mind that all oil-based products typically yellow in time. Using this over top of white paints will cause a slight yellowing effect.
We recommend our Tough Coat for going over lighter colours to avoid yellowing.